Smart Phone Flash Tool (SP Flash Tool) permits you to Flash any Stock ROM or any Custom on the Android Smartphone. Here, we have a tendency to get to talk as much concerning the good Phone Flash Tool and its features.
How To Flash Smartphone Mediatek Using Smart Phone Flash Tool (SP Flash Tool)
How To Flash Stock ROM Using Sp Flash Tool
- Download Sp Flash Tool and extract it.
- Download the Stock Firmware you wish to flash and extract it.
- Switch off your smart device.
- Now click "Flash_exe" to launch the Sp Flash Tool.
- Choose Scatter-loading file
- Click Download And Finish
Smart Phone Flash Tool (SP Flash Tool) Features
Flash Stock Rom:It allows you to flash scatter-based firmware on an android device (MTK
Based). It also allows you to downgrade or upgrade your device firmware
In a few clicks.
Flash Recovery:
It allows you to flash custom recovery to your MTK-based device. Simply,
Add the scatter file in the SP Flash tool and locate the recovery. image
and flash it.
Memory Test:
It allows users to check and verify the RAM on external memory and the
NAND Flash on the device.
Parameter Setting:
It allows users to read and write the parameter on device devices. For
For example users can easily read and write functions, and data for time
Download Smart Phone Flash Tool (all
SP Flash Tool v3.1222
SP Flash Tool v3.1238
SP Flash Tool v3.1304
SP Flash Tool v3.1312
SP Flash Tool v3.1316
SP Flash Tool v3.1328
SP Flash Tool v3.1332
SP Flash Tool v3.1344
SP Flash Tool v5.1343
SP Flash Tool v5.1352
SP Flash Tool v5.1436
SP Flash Tool v5.1452
SP Flash Tool v5.1504
SP Flash Tool v5.1512
SP Flash Tool v5.1516
SP Flash Tool v5.1520
SP Flash Tool v5.1524
SP Flash Tool v5.1528
SP Flash Tool v5.1532
SP Flash Tool v5.1548
SP Flash Tool v5 1552
SP Flash Tool v5.1552
SP Flash Tool v5.1604
SP Flash Tool v5.1612
SP Flash Tool v5.1616
SP Flash Tool v5.1620
SP Flash Tool v5.1624
SP Flash Tool v5.1628
SP Flash Tool v5.1632
SP Flash Tool v5.1636
SP Flash Tool v5.1640
SP Flash Tool v5.1644
SP Flash Tool v5.1648
SP Flash Tool v5.1708
SP Flash Tool v5.1712
SP Flash Tool v5.1716
SP Flash Tool v5 1720
SP Flash Tool v5.1720
SP Flash Tool v5.1724
SP Flash Tool v5.1728
SP Flash Tool v5.1736
SP Flash Tool v5.1744
SP Flash Tool v5.1752
SP Flash Tool v5.1804
SP Flash Tool v5.1812
SP Flash Tool v5.1816
SP Flash Tool v5.1820
SP Flash Tool v5.1824
SP Flash Tool v5.1828
SP Flash Tool v5.1836
SP Flash Tool v5.1844
SP Flash Tool v5.1904
SP Flash Tool v5 1912
SP Flash Tool v5.1912
SP Flash Tool v5.1916
SP Flash Tool v5.1512 for Linux
SP Flash Tool v5.1520 for Linux
SP Flash Tool v5.1524 for Linux
SP Flash Tool v5.1528 for Linux
SP Flash Tool v5.1532 for Linux
SP Flash Tool v5.1548 for Linux
Basic Guide for SP-Flash-Tool
- Download Sp Flash Tool and extract it. Open SPFLASHTOOL EXE and Load the Scatter file ( Click Scatter Loading).
- Download the Stock Firmware you wish to flash and extract it.
- Switch off your smart device.
Connect the device and click on the "DOWNLOAD" button on top ( not the tab), If it asks click on "yes"
It is done and the MTK flash tool will do the rest. If you have a problem with flashing utility or drivers install MediaTek USB drivers from our links. - Now click "Flash_exe" to launch the Sp Flash Tool.
- Choose Scatter-loading File.
After run, you will be prompted with a green circle.congrats you have successfully flash your MediaTek Android smartphones with SP Flash Tool. - Click Download And Finish
Android devices supported by SP Flash Tool
SP Flash supports all Chinese Android devices with the MediaTek processor.
With the Flash Tool program, you can firmware brick – a phone that cannot be switched on or hangs on the splash screen.
Another feature of Flash Tool is no need to install it on your mobile phone. For example, if you can not access the recovery menu when you start your smartphone. Flash Tool can help you to fix this problem. You can download FlashTool directly to your computer, install it and flash the smartphone.
Error SP Flash Tool when Flashing Devices MediaTek (MTK)
Error code error name of SP Flash Tool1002 or 0x3EA S_INVALID_ARGUMENTS
Incorrect Scatter file. For example, in the scatter file, the PRELOADER and DSP_BL blocks are disabled.
1003 or 0x3EB S_COM_PORT_OPEN_FAIL
Solution
The problem with the port. For example, an error may occur if COM ports are disabled in the BIOS. Even if the COM port is virtual, and the physical USB is. In this case, you will not see the equipment on which the PRELOADER drivers are placed. The problem can be in the USB cable, in this case, replace the cable. If the USB port of the computer is faulty, then it is necessary to puncture the cable to another port. Theoretically, it can occur in the USB UART mode. The port was visible, it was selected in the Flash Tool settings, and the program recorded it in the INI file, after which the system was rebooted with the port disabled, and immediately launched the Flash Tool without selecting the port .. When after the red strip pass to 100% as a result of the firmware, Operation buttons are again available for clicking, but no error message, no green circle, this error appears, or similar to it, the code of which is 1013. In this state, the Flash Tool does not close the COM port, and trying to restart any operation by reconnecting the device will cause an error. If the program has moved into such an undefined state, then you need to close it and restart it.
1011 or 0x3F3 S_NOT_ENOUCH_STORAGE_SPACE
Solution
Incorrect Scatter file. For example, in the scatter file, the PRELOADER and DSP_BL blocks are disabled1012 or 0x3F4 S_NOT_ENOUGH_MEMORY
Solution
Use a more recent version of the driver
1013 or 0x3F5 S_COM_PORT_OPEN_FAIL
Solution
An error similar to error 1003. Solutions should be sought on the same principle. Can help change the version of the flash drive, or flash the device with the battery off1018 or 0x3FA S_UNKNOWN_TARGET_BBCHIP
Solution
Use a more recent version of the driver
1022 or 0x3FE S_UNSUPPORTED_VER_OF_DA
Solution
Use a more recent version of the driver
1040 or 0x410 S_UNSUPPORTED_OPERATION
Solution
The Scatter file is not suitable for the device. For example, the file name contains the version number 6777, and the device version 65551041 or 0x411 CHS_ERR
Solution
You must go to the tab Help, click Open Logs Folder, And delete all the logs. Go to the folder with the firmware and delete the file Checksum.ini2004 or 0x7D4 S_BROM_DOWNLOAD_DA_FAIL
Solution
The problem may be a version of the SP FLASH TOOL. Download the version at the end of which there is the designation SEC. An error may occur if the operating system has a lot of USB drivers for different devices. Use the program USBDeview To remove installed USB drivers and perform firmware via Flash Tool. Can help connect the device with the volume key held down + or -. If the above methods do not help, after the error appears, you must immediately close the window with an error and immediately click the button to download2005 or 0x7D5 S_BROM_CMD_STARTCMD_FAIL
Solution
An error can occur on MTD devices if the check box is not checked on the PRELOADER or DSP_BL blocks when selecting the Download mode. You must use a suitable version of the Flash Tool, for example, v22020 or 0x7E4 S_BROM_CHKSUM16_MEM_RESULT_DIFF
Solution
In the Flash Tool settings, forcibly check the box, indicating that the device is without a battery. After that, connect the device through the test point, but already with the battery2035 or 0x7F3 S_BROM_CMD_JUMP_DA_FAIL
Solution
After clicking Download connect to the computer an off-device with pressed volume buttons3001 or 0xBB9 S_DA_EXT_RAM_ERROR
Solution
Perhaps the error is connected to the connection. Check the cable, reconnect the cable to another USB port
3012 or 0xBC4 NAND_FLASH_NOT_FOUND
Solution
The problem is related to the definition of the flash memory device. Use a different version of the program. As versions of different versions are updated, information about flash memory. If the above option does not help, try to flash the device on another computer, because there are problems that do not allow you to correctly determine the memory on a particular machine.
3013 or 0xBC5 S_DS_SOC_CHECK_FAIL
Solution
It's possible that the checkmark for the Uboot checkbox is not checked in the flash tool's settings. Uboot - the boot loader of the operating system and drivers to initialize the main hardware, such as display, processor, and GPIO. The error can occur if incorrect characters, and hieroglyphs, are present in the path line on which the program or the firmware is located. It is acceptable to place the program and the firmware file only along the path that consists entirely of Latin characters.
3054 or 0xBEE S_DA_NFB_BOOTLOADER_NOT_EXIST
Solution
Use a different version of the program. Try to replace the version of the driver with the fifth to the third version.3066 or 0xBFA S_DA_HANDSET_FAT_INFO_NOT_FOUND
Solution
Occurs when automatic formatting occurs. It is necessary to set the address of the formatting manually.3144 or 0xC48 S_DA_EMMC_FLASH_NOT_FOUND
Solution
An error occurs if there is a hardware problem with the device. It can also occur if the Scatter file does not fit the device. For example, in the name there is emmc, and the device is actually with MTD flash. There is a possibility that the problem will be solved if you use another computer and the operating system. It is preferable to use a computer running Windows XP with newly installed drivers3149 or 0xC4D S_DA_SDMMC_WRITE_FAILED
Solution
Use a different version of the flash drive. If you are stitching 3 versions, try version 5, or vice versa. Select the Format all + download mode. It is necessary to reinstall the drivers for the device and ensure that the device in the Device Manager is correctly displayed as MTK USB PORT. Launch the Flash Tool, uncheck all items except PRELOADER and sew in Download mode. If the progress goes but at the end, there is an error, then we are sure that we will only flash PRELOADER. At the top of the Flash Tool window, next to the Download button, click the Format button. A window of formatting settings with the formatting modes Auto and Manual open. In the Auto mode, there are two settings, check the upper box and click OK. The formatting starts. After finishing the formatting, re-flash the PRELOADER. After successful firmware PRELOADER, flash the device completely.
3168 or 0xC60 S_CHIP_TYPE_NOT_MATCH
Solution
Incorrect scatter file. Use the Scatter file from your device.4001 or 0xFA1 S_FT_DA_NO_RESPONSE
Solution
Change the USB port and transfer the Flash Tool to the root of the disk. Perhaps there is no information about the CPU/Flash in the Download Agent, so Use a more recent version of the driver. The error can be hardware, for example, if a failed flash memory.
4008 or 0xFA8 S_FT_DOWNLOAD_FAIL
Solution
Use a different SP FLASH TOOL version. There is a chance that the replacement version will help to the older one. The problem can be in the USB cable, in this case, replace the cable or USB port. Perhaps in the process of inserting a battery. Charge the device and try the firmware again. You can try to remove the battery from the device and try to flash without it. Try formatting the device.4009 or 0xFA9 S_FT_READBACK_FAIL
Solution
In addition to reading errors in the device itself, an error can be observed in the event of errors in the file system of the computer. For example, there is not enough disk space, or the file 4010 or 0xFAA S_FT_FORMAT_FAIL
Solution
It is recommended to change the version of the program to version 5, it is highly advisable to start with version 5.1352.01 and try to flash the machine through the Firmware upgrade mode. The firmware must be original for the machine and contain all the blocks. Try changing the firmware cable to a better one.4032 or 0xFC0 S_FT_ENABLE_DRAM_FAIL
Solution
An error may occur when flashing on a machine with an MT6589 processor. To fix this, format the device using the Format button. Do not format if you have an MT6575 or 6577 processor. After formatting, flash the device with all the checkmarks by clicking the Download button. You can try to reinstall the drivers and perform the formatting again. Run the firmware if the previous attempt was unsuccessful. If nothing has helped, then try changing the version of the flash drive. It is recommended to start with version 5.1352.01. The error is due to the incorrect PRELOADER block. It is necessary to find a native PRELOADER and flash it. If the firmware does not work with the standard method, then it may be necessary to flash the device through the test point. This error can be caused by a low battery charge. You can try to solve the problem by closing the 4th and 5th pin on the USB connector.4037 or 0xFC5 S_FT_FS_READ_FAIL 0xFC5
Solution
An error can occur if there are incorrect characters in the path line on which the program is located or the firmware, hieroglyphics. It is acceptable to place the program and the firmware file only along the path that consists entirely of Latin characters.4050 or 0xFD2 S_FT_NEED_DOWNLOAD_ALL_FAIL
Solution
Occurs when the block sizes in the PMT and in the Scatter file do not match. In general, this error is eliminated by loading all the blocks, then the size in the PMT should change to the correct one. You can try changing the version of the broacher4058 or 0xFDA S_FT_GET_MEMORY_FAIL
Solution
The error occurs when there are problems with the flash memory. It is not recommended to solve the problem yourself. Options for eliminating the error: warming up the flash memory chip with a blowtorch at a high temperature, about 400 degrees Celsius. Probably, it will be necessary to replace the chip with a donor fee, or to a new one.
5002 or 0x138A S_INVALID_DA_FILE
Solution
When configuring the Flash Tool Download Agent, you must select the driver that came with this version. Selecting other agents causes this error5007 or 0x138F S_FTHND_FILE_IS_NOT_LOADED_YET
Solution
The error usually occurs if the Flash Tool has a checkmark on the block to which the path is incorrectly specified or absent. To fix this, you must specify the correct path to the desired firmware block. Also, if this error occurs, use a different SP FLASH TOOL version, for example, v55054 or 0x13BE S_DL_GET_DRAM_SETTINGS_FAIL
Solution
The error lies in the fact that the Flash Tool could not get the device's RAM settings. It can occur in the event that a full reset via the Flash Tool has been performed. Also, an error can occur when data is exchanged between the Download Agent and the device. If the driver does not work correctly, the transfer failure can occur only if you have Windows XP with a service pack lower than the third one. You need to install a third service pack. In older versions, the usbser.sys driver has not been updated and there will be no need to reinstall it5066 or 0x13CA S_DL_PC_BL_INVALID_GFH_FILE_INFOR
Solution
Incorrect Scatter file. It can occur if you selected Scatter from a folder with files that are not prepared for Flash Tool. You must select the Scatter file5069 or 0x13CD S_DL_PMT_ERR_NO_SPACE
Solution
The error most likely arises from the peculiarities of flash memory. It happens that formatting, even low-level, does not have any effect. Ie in flash memory, everything remains as it is. If you do Format, you may receive an error 1037 and a message is displayed, with the need to perform Download to create the partition tables. A firmware Upgrade can not be performed, due to error 1037. You can make Download only PRELOADER. Loading any other partition will generate an error 5069. From the Scatter version, the FAT partition size does not depend. You can execute in Manual Format, but
within the UA Size. After formatting, the attempt to fill any section again is reduced to the error 5069
6045 or 0x179D S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND
Solution
It is recommended to change the version of the flasher to version 5, it is highly desirable to start with version 5.1352.016104 or 0x17D8 S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE
Solution
It is recommended to change the version of the flasher to version 5, it is highly desirable to start with version 5.1352.016124 or 0x17EC S_SECURITY_INVALID_PROJECT (6124), MSP ERROE CODE: 0 x 00
Solution
There is a possibility that the error will disappear after the firmware of the native PRELOADER via the Download button. After that, perform the modified version of the Recovery and the full firmware
6126 or 0x17EE S_SECURITY_SECRO_HASH_INCORRECT
Solution
The error is often found on devices Huawei G610, Huawei G700, and LG L60 Dual and is currently not solvable at home. Consequences: periodic reboot, there are deleted files in the device, and an error occurs when checking the memory for writing. The reason is that the device has a locked loader, which is why it is necessary to flash the unlocked SEC_RO for unlocking and further flashing. All is reduced to the fact that it is with the firmware SEC_RO that this error occurs. It is recommended to replace the memory in the service
The error is often found on devices Huawei G610, Huawei G700, and LG L60 Dual and is currently not solvable at home. Consequences: periodic reboot, there are deleted files in the device, and an error occurs when checking the memory for writing. The reason is that the device has a locked loader, which is why it is necessary to flash the unlocked SEC_RO for unlocking and further flashing. All is reduced to the fact that it is with the firmware SEC_RO that this error occurs. It is recommended to replace the memory in the service
8038 or 0x1F66 SP FLASH TOOL ERROR/PMT changed for the ROM; it must be downloaded
Solution
To resolve this error, you must use the Firmware upgrade mode. Attention! The firmware must be specific to the firmware to be flashed and contain absolutely ALL blocks that are usually found in the stock firmware8045 or 0x1F6D SP FLASH TOOL ERROR
Solution
The error is similar to 8038, but in practice, editing the Scatter file does not help. To solve the problem, you can contact the service center to flash the device through the programmer. At home, sometimes the version of the firmware is activated via the Download button with all the checkmarks selected. You can also try changing the version of the firmware to version 5, it is highly advisable to start with version 5.1352.01. The problem can be hardware8200 or 0x2008 SP FLASH TOOL ERROR
Solution
The error occurs if you try to flash the machine on one platform, or firmware from another. For example, you have MT6577, and you are trying to flash firmware from the device to MT6575. You can try changing the version of the firmware to version 5, it is highly desirable to start with version 5.1352.018417 or 0x20E1 SP FLASH TOOL ERROR: The load scatters file is invalid!
Solution
An error can occur if there are incorrect characters in the path line on which the program is located or the firmware, hieroglyphics. It is acceptable to place the program and the firmware file only along the path that consists entirely of Latin characters.Unrecognized ROM detected
The application was not started because it was not properly configured. Reinstalling the application can solve this problem
Post a Comment