- If you use wifi and can't open the MRT tool, please use VPN
- Open the MRT tool
- Select the MTK special Tool
- Select Format (Unlock) menu
- Select BBK Only
- V5 Only click Start
- Your device must be off
- Press both the Volume Down and Up buttons
- And connect your device so that the MRT reads your driver by itself.
Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM22
>>> Device driver identification:
MediaTek USB Port_V1632
>>> Mobile Has Connect...
CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CB00
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000747C00000 -> 29820M
Flash ID: 0x150100525831344D
Flash Name: Samsung_Unknow
Flash symbol: RX14MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM46
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
ADD(HEX):0x00F9800000 Size(HEX):0x064D3FBE00
Corresponding operation completed!!!
Post a Comment