Skip to content Skip to sidebar Skip to footer

Firmware Oppo Reno 6 Pro Plus 5G PENM00 (Flash File)

Oppo Reno 6 Pro Plus 5G

The OPPO Reno 6 Pro Plus 5G is a smartphone that was released in 2021. It is powered by a Qualcomm Snapdragon 870 processor and has 8GB of RAM. The phone has a 6.55-inch AMOLED display with a resolution of 1080 x 2400 pixels and a 90Hz refresh rate.

It has a quad-camera setup on the back, consisting of a 64-megapixel main camera, an ultra-wide-angle camera, a macro camera, and a depth sensor. It also has a 32-megapixel front-facing camera for selfies and video calls.

The phone is equipped with a 4,500mAh battery and supports fast charging with a 65W charger. It runs on Android 11 with OPPO's ColorOS 11.1 user interface.

Firmware Oppo Reno 6 Pro Plus 5G

File Name: Oppo_Reno_6_Pro_Plus_5G_PENM00_Domestic_11_A.11_220328_RFT.zip
File Size: 8 GB

File Name: Oppo_Reno_6_Pro_Plus_5G_PENM00_Domestic_11_A.15_210621_RFT.zip
File Size: 7.89 GB

File Name: Oppo_Reno_6_Pro_Plus_5G_PENM00_Domestic_11_C.11_220517_RFT.zip 
File Size: 8.99 GB
Download

How to flash this phone

Flashing a phone refers to installing a new operating system or firmware on the device. Here are the steps you can follow to flash the OPPO Reno 6 Pro Plus 5G:
  1. Download the firmware for the OPPO Reno 6 Pro Plus 5G from the internet or from the OPPO official website. Make sure to select the correct firmware version for your device.
  2. Extract the firmware file on your computer and save it in a location that is easy to access.
  3. Download and install the OPPO USB drivers on your computer. These drivers are required to establish a connection between your phone and the computer.
  4. Download and install a flashing tool such as SP Flash Tool or QFIL on your computer. These tools are used to flash firmware files on OPPO devices.
  5. Open the flashing tool and select the firmware file you extracted in step 2.
  6. Follow the instructions provided by the flashing tool to complete the flashing process. Make sure to keep your phone connected to the computer throughout the process.
It is important to note that flashing a phone can be risky and can potentially brick your device if not done properly. Therefore, it is recommended to follow the instructions carefully and only flash the firmware if you are confident in your ability to do so.

How to remove a password

If you want to remove the password from your OPPO Reno 6 Pro Plus 5G, you can try the following methods:

  1. If you remember the password:
  • Go to the lock screen and enter the password to unlock the phone.
  • Go to the Settings app and navigate to the "Security & privacy" or "Security" section.
  • Look for the option to change or remove the screen lock and follow the prompts to remove the password.
  1. If you have forgotten the password:
  • If you have set up a Google account on your phone, you can try using the "Forgot pattern" or "Forgot password" feature to reset the screen lock. This feature allows you to reset the password by entering your Google account details and following the prompts.
  • If you do not have a Google account or if the "Forgot pattern" or "Forgot password" feature is not working, you may need to perform a factory reset to remove the password. However, this will erase all data on the phone, so make sure to back up your important files before proceeding. To perform a factory reset, turn off the phone and then press and hold the volume down and power buttons until the recovery mode menu appears. Use the volume buttons to navigate to the "Wipe data/factory reset" option and press the power button to select it. Follow the prompts to complete the factory reset.
If you are unable to remove the password using the above methods, you may need to seek assistance from a professional service center or from OPPO customer support.

Arjun Lap
Arjun Lap "We will never know the real answer before we try." twitter @firmwarezip facebook fb.com/firmwarezip

Post a Comment for "Firmware Oppo Reno 6 Pro Plus 5G PENM00 (Flash File)"