[Firmware] Vivo Y12 / Y15 (2019) PD1901BF Mediatek MT6765

Download Official Firmware Vivo 1901 Y12 / Y15 2019 PD1901BF to repair damaged software such as bootloop, Forgot pattern / Forgot lock screen password, Dead after flash, FRP or Forgot google account, applications often stalled because too many applications or excessive memory usage resulting in full internal .
[Firmware] Vivo Y12 / Y15 (2019) PD1901BF
[Firmware] Vivo Y12 / Y15 (2019) PD1901BF

Firmware Vivo 1901 or Vivo Y12 / Y15 2019 is Official Firmware from Vivo or commonly used by the Service Center, flash file / stock ROM type scatter file that can be flashed using AFTool, SP_FlashTool (if supported) or other MTK tools that support.

Although this Official firmware should check or check the type and version as well so that it does not error or experience other software damage, because the wrong choice of firmware can cause total death on the device or other software damage.

How to flash Vivo (1901) Y12 / Y15 2019 PD1901BF

As the previous discussion to flash vivo is the same as other vivo that is depending on the type of firmware used, if you only update the OS or can still enter recovery you should use OTA Firmware, but flash using OTA cannot eliminate other screen patterns or passwords, for Screen Lock must be scattered with flash files using AFTool, SP-FlashTool (if supported) or other MTK Tools.
Flash Vivo 1901 Y12 / Y15 2019 PD1901BF there are several materials that must be prepared


PC / Laptop
Vivo USB Driver
Tool that supports Flash Vivo 1901


  • PD1901BF_EX_A_1.9.13_vivo_mtk_alps-release-p0.mp3-pre3_mtk6771.tar.gz
  • Type: Flash File, Size: 4.7GB
  • SoC: Mediatek MT6765
  • Country: IN, ID, VN, BD, PK, PH, KH, NP, MM, RU, MA, AE, KZ


Download  Android FileHost
                   Mirror Android Filehost

How to Install Stock Firmware Vivo Y12 PD1901BF?
After downloading all the required files, you need to follow the steps. It will assist you to try and
do the flashing procedure. Let’s begin with the steps of Vivo Y12 flash file, Stock firmware all
version.

  • Step 1: At First, you must have to Download the latest SP Flash Tools software on your PC.
  • Step 2: Now, you also have to Download the latest Driver firmware of your Vivo Y12 Phone.
  • Step 3:  Install the MTK USB Driver software on your PC.
  • Step 4: Then, Extract the Downloaded firmware. you’ll Extract on the Desktop for batternavigations.
  • Step 5: Carefully check that, your battery has up to 50-60% charge.
  • Step 6: Now, Open the Flash Tools. Select the right firmware file & click the Start Button.
  • Step 7: Turn off your phone and remove the battery (If Removable).
  • Step 8: Plug the USB cable from your computer to your phone, then insert your phone battery.
  • Step 9: Flashing will be Start. Now, Wait for 3/5 minutes, you will display a perfect logo.

Remove the USB cable from your phone & turn on your mobile and enjoy! How to flash Vivo (1901) Y12 / Y15 2019 PD1901BF


Berlangganan update artikel terbaru via email:

0 Response to "[Firmware] Vivo Y12 / Y15 (2019) PD1901BF Mediatek MT6765"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel